No photo of Christophe Pierre

View Scopus Profile

Christophe Pierre

Calculated based on number of publications stored in Pure and citations from Scopus
1985 …2024

Research activity per year

Filter
Conference contribution

Search results

  • 2016

    Full 3d rotor/stator interaction simulations in aircraft engines with time-dependent angular speed

    Batailly, A., Legrand, M. & Pierre, C., 2016, Structures and Dynamics. (Proceedings of the ASME Turbo Expo; vol. 7A-2016).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    Open Access
    1 Scopus citations
  • 2011

    Influence of abradable coating wear mechanical properties on rotor stator interaction

    Batailly, A., Legrand, M. & Pierre, C., 2011, ASME 2011 Turbo Expo: Turbine Technical Conference and Exposition, GT2011. PARTS A AND B ed. p. 941-950 10 p. (Proceedings of the ASME Turbo Expo; vol. 6, no. PARTS A AND B).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    Open Access
    13 Scopus citations
  • 2010

    Nonlinear modal analysis of mechanical systems with friction less contact interfaces

    Laxalde, D., Legrand, M. & Pierre, C., 2010, Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 2009, DETC2009. PART A ed. p. 401-407 7 p. (Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 2009, DETC2009; vol. 1, no. PART A).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    3 Scopus citations

  • Numerical investigation of abradable coating wear through plastic constitutive law: Application to aircraft engines

    Legrand, M. & Pierre, C., 2010, Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 2009, DETC2009. PART B ed. p. 907-916 10 p. (Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 2009, DETC2009; vol. 1, no. PART B).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    Open Access
    8 Scopus citations

  • Resonance suppression in multi-DOF rotating flexible structures using order-tuned absorbers

    Gozen, S., Olson, B. J., Shaw, S. W. & Pierre, C., 2010, Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 2009, DETC2009. PART B ed. p. 845-854 10 p. (Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 2009, DETC2009; vol. 1, no. PART B).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    1 Scopus citations
  • 2009

    An efficient reduced order modeling technique for nonlinear vibration analysis of structures with intermittent contact

    Saito, A., Castanier, M. P. & Pierre, C., 2009, 17th AIAA/ASME/AHS Adaptive Structures Conf., 11th AIAA Non-Deterministic Approaches Conf., 10th AIAA Gossamer Spacecraft Forum, 5th AIAA Multidisciplinary Design Optimization Specialist Conf., MDO. 2009-2493. (Collection of Technical Papers - AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    Open Access
    1 Scopus citations

  • Evaluation of component mode synthesis methods for the detection of modal interaction through rotor stator contacts

    Batailly, A., Legrand, M., Cartraud, P., Pierre, C. & Lombard, J. P., 2009, ASME 2009 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC/CIE2009. PARTS A AND B ed. p. 863-871 9 p. (Proceedings of the ASME Design Engineering Technical Conference; vol. 1, no. PARTS A AND B).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    Open Access
    1 Scopus citations

  • Nonlinear modal analysis of mechanical systems with frictionless contact interfaces

    Laxalde, D., Legrand, M. & Pierre, C., 2009, ASME 2009 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC/CIE2009. PARTS A AND B ed. p. 401-407 7 p. (Proceedings of the ASME Design Engineering Technical Conference; vol. 1, no. PARTS A AND B).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    Open Access
    1 Scopus citations
  • 2008

    Development of beam-to-beam contact detection algorithms for rotor-stator rubbing applications

    Roques, S., Legrand, M., Stoisser, C. M., Cartraud, P. & Pierre, C., 2008, 2007 Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, DETC2007. p. 1187-1194 8 p. (2007 Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, DETC2007; vol. 1 PART B).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    Open Access
    4 Scopus citations

  • Effects of a cracked blade on mistuned turbine engine rotor vibration

    Saito, A., Castanier, M. P. & Pierre, C., 2008, 2007 Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, DETC2007. p. 1445-1456 12 p. (2007 Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, DETC2007; vol. 1 PART B).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    6 Scopus citations

  • Study of component mode synthesis methods in a rotor-stator interaction case

    Batailly, A., Legrand, M., Cartraud, P., Pierre, C. & Lombard, J. P., 2008, 2007 Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, DETC2007. p. 1235-1242 8 p. (2007 Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, DETC2007; vol. 1 PART B).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    Open Access
    12 Scopus citations
  • 2007

    System identification of multistage turbine engine rotors

    Song, S. H., Castanier, M. P. & Pierre, C., 2007, Proceedings of the ASME Turbo Expo 2007 - Power for Land, Sea, and Air. p. 569-582 14 p. (Proceedings of the ASME Turbo Expo; vol. 5).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    25 Scopus citations
  • 2006

    A component-based parametric reduced-order modeling technique and its application to probabilistic vibration analysis and design optimization

    Park, K., Zhang, G., Castanler, M. P. & Pierre, C., 2006, Proceedings of 2006 ASME International Mechanical Engineering Congress and Exposition, IMECE2006 - Design Engineering. (American Society of Mechanical Engineers, Design Engineering Division (Publication) DE).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    3 Scopus citations

  • An efficient disk design optimization process for limiting mistuned blade vibration and stress levels in turbine engine rotors

    Baik, S., Castanier, M. P. & Pierre, C., 2006, Proceedings of the 11th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, ISROMAC-11. p. 838-850 13 p. (Proceedings of the 11th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, ISROMAC-11; vol. 2).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • A novel hybrid method to predict the convergence history of aeroelastic calculations of mistuned/tuned bladed disks

    He, Z., Epureanu, B. I. & Pierre, C., 2006, Proceedings of the ASME Pressure Vessels and Piping Conference 2006. p. 719-729 11 p. (American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP; vol. 9).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • A novel hybrid method to predict the convergence history of aeroelastic calculations of mistuned/tuned bladed disks

    He, Z., Epureanu, B. I. & Pierre, C., 2006, Proceedings of 2006 ASME Pressure Vessels and Piping Division Conference - ASME PVP2006/ICPVT-11 Conference - Pressure Vessel Technologies for the Global Community. (American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP; vol. 2006).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Component-mode-based Monte Carlo simulation for efficient probabilistic vibration analysis

    Lee, S. Y., Castanier, M. P. & Pierre, C., 2006, Collection of Technical Papers - 47th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference: 14th AIAA/ASME/AHS Adaptive Structures Conference, 8th AIAA Non-deterministic App. p. 4832-4844 13 p. (Collection of Technical Papers - AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference; vol. 7).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    Open Access
    2 Scopus citations

  • Efficient nonlinear vibration analysis of the forced response of rotating cracked blades

    Saito, A., Castanier, M. P. & Pierre, C., 2006, Proceedings of 2006 ASME International Mechanical Engineering Congress and Exposition, IMECE2006 - Applied Mechanics Division. (American Society of Mechanical Engineers, Applied Mechanics Division, AMD).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    1 Scopus citations

  • Experimental Monte Carlo mistuning assessment of bladed disk vibration using forcing variations

    Li, J., Castanier, M. P., Pierre, C. & Ceccio, S. L., 2006, Collection of Technical Papers - 47th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference: 14th AIAA/ASME/AHS Adaptive Structures Conference, 8th AIAA Non-deterministic App. p. 4540-4548 9 p. (Collection of Technical Papers - AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference; vol. 7).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    Open Access
    11 Scopus citations

  • Order-Tuned and impact absorbers for rotating flexible structures

    Shaw, S. W., Olson, B. J. & Pierre, C., 2006, Proceedings of the 11th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, ISROMAC-11. p. 612-621 10 p. (Proceedings of the 11th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, ISROMAC-11; vol. 2).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Rotor-stator nodal diameter mode interaction by means of contact in an aircraft engine

    Legrand, M., Idoux, L., Pierre, C. & Cartraud, P., 2006, Proceedings of the 11th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, ISROMAC-11. p. 602-611 10 p. (Proceedings of the 11th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, ISROMAC-11; vol. 2).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • 2005

    Aircraft engine structural rotor-stator modal interaction

    Legrand, M., Peseux, B., Roques, S. & Pierre, C., 2005, Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conferences - DETC2005: 20th Biennial Conf. on Mech. Vibration and Noise. p. 2523-2532 10 p. (Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference - DETC2005; vol. 1 C).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    Open Access

  • Disk design methodology for reducing blade vibration in turbine engine rotors

    Baik, S., Castanier, M. P. & Pierre, C., 2005, Proceedings of the ASME International Design Engineering Techn. Conferences and Computers and Information in Engineering Conferences - DETC2005: 20th Biennial Conf. on Mechanical Vibration and Noise. p. 1545-1555 11 p. (Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference - DETC2005; vol. 1 B).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    5 Scopus citations

  • Effects of unsteady aerodynamics on the dynamic response of mistuned bladed disks

    He, Z., Epureanu, B. I. & Pierre, C., 2005, 3rd M.I.T. Conference on Computational Fluid and Solid Mechanics. p. 250-255 6 p. (3rd M.I.T. Conference on Computational Fluid and Solid Mechanics).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    8 Scopus citations

  • Multi-stage modeling of turbine engine rotor vibration

    Song, S. N., Castanier, M. P. & Pierre, C., 2005, Proceedings of the ASME International Design Engineering Techn. Conferences and Computers and Information in Engineering Conferences - DETC2005: 20th Biennial Conf. on Mechanical Vibration and Noise. p. 1533-1543 11 p. (Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference - DETC2005; vol. 1 B).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    35 Scopus citations

  • Order-tuned vibration absorbers for cyclic rotating flexible structures

    Olson, B. J., Shaw, S. W. & Pierre, C., 2005, Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conferences - DETC2005: 20th Biennial Conf. on Mech. Vibration and Noise. p. 2475-2484 10 p. (Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference - DETC2005; vol. 1 C).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    23 Scopus citations
  • 2004

    Multi-domain multi-step topology optimization for vehicle structure crashworthiness design

    Wang, H., Ma, Z. D., Kikuchi, N., Pierre, C. & Raju, B., 2004, 2004 SAE World Congress.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    13 Scopus citations
  • 2003

    A compact, generalized component mode mistuning representation for modeling bladed disk vibration

    Lim, S. H., Bladh, R., Castanier, M. P. & Pierre, C., 2003, 44th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference. (44th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    Open Access
    22 Scopus citations

  • Correlation of tuned free vibration characteristics with mistuning sensitivity for a bladed disk

    Hussein, M. I., Pierre, C. & Castanier, M. P., 2003, 44th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference. (44th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    Open Access
    1 Scopus citations

  • Design optimization of structural acoustic problems using FEM-BEM

    Kim, N. H., Choi, K. K., Dong, J. & Pierre, C., 2003, 44th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference. (44th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    Open Access
    1 Scopus citations

  • Hybrid frequency-time domain methods for the analysis of complex structural systems with dry friction damping

    Poudou, O. & Pierre, C., 2003, 44th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference. (44th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    19 Scopus citations
  • 2002

    Multi-domain topology optimization for vehicle substructure design

    Ma, Z. D., Kikuchi, N., Pierre, C. & Raju, B., 2002, Design Engineering. p. 12-20 9 p. (ASME International Mechanical Engineering Congress and Exposition, Proceedings).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    12 Scopus citations

  • The construction of nonlinear normal modes for systems with internal resonance: Application to rotating beams

    Jiang, D., Pierre, C. & Shaw, S. W., 2002, Design Engineering. p. 445-456 12 p. (ASME International Mechanical Engineering Congress and Exposition, Proceedings).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    2 Scopus citations
  • 2001

    Effects of multi-stage coupling and disk flexibility on mistuned bladed disk dynamics

    Bladh, R., Castanier, M. P. & Pierre, C., 2001, Manufacturing Materials and Metallurgy; Ceramics; Structures and Dynamics; Controls, Diagnostics and Instrumentation; Education; IGTI Scholar Award. (Proceedings of the ASME Turbo Expo; vol. 4).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    4 Scopus citations

  • Reduced order modeling techniques for dynamic analysis of mistuned multi-stage turbomachinery rotors

    Bladh, R., Castanier, M. P. & Pierre, C., 2001, Manufacturing Materials and Metallurgy; Ceramics; Structures and Dynamics; Controls, Diagnostics and Instrumentation; Education; IGTI Scholar Award. (Proceedings of the ASME Turbo Expo; vol. 4).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    7 Scopus citations
  • 2000

    Component-mode-based reduced order modeling techniques for mistuned bladed disks, part i: Theoretical models

    Bladh, R., Castanier, M. P. & Pierre, C., 2000, Manufacturing Materials and Metallurgy; Ceramics; Structures and Dynamics; Controls, Diagnostics and Instrumentation; Education. (Proceedings of the ASME Turbo Expo; vol. 4).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    12 Scopus citations

  • Component-mode-based reduced order modeling techniques for mistuned bladed disks, part II: Application

    Bladh, R., Castanier, M. P. & Pierre, C., 2000, Manufacturing Materials and Metallurgy; Ceramics; Structures and Dynamics; Controls, Diagnostics and Instrumentation; Education. (Proceedings of the ASME Turbo Expo; vol. 4).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    Open Access
    10 Scopus citations

  • COMPONENT-MODE-BASED REDUCED ORDER MODELING TECHNIQUES FOR MISTUNED BLADED DISKS, PART II: APPLICATION

    Bladh, R., Castanier, M. P. & Pierre, C., 2000, Manufacturing Materials and Metallurgy; Ceramics; Structures and Dynamics; Controls, Diagnostics and Instrumentation; Education. V004T03A007. (Proceedings of the ASME Turbo Expo; vol. 4).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Experimental investigation of mode localization and forced response amplitude magnification for a mistuned bladed disk

    Judge, J., Pierre, C. & Mehmed, O., 2000, Manufacturing Materials and Metallurgy; Ceramics; Structures and Dynamics; Controls, Diagnostics and Instrumentation; Education. (Proceedings of the ASME Turbo Expo; vol. 4).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    8 Scopus citations
  • 1999

    An advanced damper model for the dynamics of dry friction damped systems

    Guillen, J., Pierre, C. & Lagrange, T., 1999, 17th Biennial Conference on Mechanical Vibration and Noise. p. 2151-2161 11 p. (Proceedings of the ASME Design Engineering Technical Conference; vol. 7B-1999).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    3 Scopus citations

  • Characteristic constraint modes for component mode synthesis

    Castanier, M. P., Tan, Y. C. & Pierre, C., 1999, 17th Biennial Conference on Mechanical Vibration and Noise. p. 2311-2318 8 p. (Proceedings of the ASME Design Engineering Technical Conference; vol. 7B-1999).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    4 Scopus citations

  • Effects of harmonic intentional mistuning on the free response of bladed disks

    Brewer, M. E., Castanier, M. P. & Pierre, C., 1999, 17th Biennial Conference on Mechanical Vibration and Noise. p. 1873-1884 12 p. (Proceedings of the ASME Design Engineering Technical Conference; vol. 7B-1999).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    13 Scopus citations

  • Model reduction of a nonlinear rotating beam through nonlinear normal modes

    Pesheck, E., Pierre, C. & Shaw, S. W., 1999, 17th Biennial Conference on Mechanical Vibration and Noise. p. 1915-1923 9 p. (Proceedings of the ASME Design Engineering Technical Conference; vol. 7B-1999).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    1 Scopus citations
  • 1998

    APPROXIMATIONS OF POWER FLOW BETWEEN TWO COUPLED BEAMS USING STATISTICAL ENERGY METHODS

    Tan, Y. C., Castanier, M. R. & Pierre, C., 1998, Dynamics, Acoustics and Simulations. p. 9-19 11 p. (ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE); vol. 1998-J).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    5 Scopus citations

  • Reduced Order Modeling and vibration analysis of mistuned bladed disk assemblies with shrouds

    Bladh, R., Castanier, M. P. & Pierre, C., 1998, Manufacturing Materials and Metallurgy; Ceramics; Structures and Dynamics; Controls, Diagnostics and Instrumentation; Education. (Proceedings of the ASME Turbo Expo; vol. 5).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    1 Scopus citations
  • 1997

    A global methodology for the modal reduction of large nonlinear systems containing quadratic and cubic nonlinearities

    Pesheck, E. & Pierre, C., 1997, 16th Biennial Conference on Mechanical Vibration and Noise. V01AT05A003. (Proceedings of the ASME Design Engineering Technical Conference; vol. 1A-1997).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    6 Scopus citations

  • An analysis of a friction damped system using two component mode methods

    Pesheck, E. & Pierre, C., 1997, 16th Biennial Conference on Mechanical Vibration and Noise. V01CT14A011. (Proceedings of the ASME Design Engineering Technical Conference; vol. 1C-1997).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    2 Scopus citations

  • An experimental investigation of vibration localization in bladed disks, part I: Free response

    Kruse, M. J. & Pierre, C., 1997, Manufacturing Materials and Metallurgy; Ceramics; Structures and Dynamics; Controls, Diagnostics and Instrumentation; Education; IGTI Scholar Award. (Proceedings of the ASME Turbo Expo; vol. 4).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    12 Scopus citations

  • An experimental investigation of vibration localization in bladed disks, Part II: Forced response

    Kruse, M. J. & Pierre, C., 1997, Manufacturing Materials and Metallurgy; Ceramics; Structures and Dynamics; Controls, Diagnostics and Instrumentation; Education; IGTI Scholar Award. (Proceedings of the ASME Turbo Expo; vol. 4).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    Open Access
    8 Scopus citations

  • CONSIDERATION ON THE BENEFITS OF INTENTIONAL BLADE MISTUNING FOR THE FORCED RESPONSE OF TURBOMACHINERY ROTORS

    Castanier, M. P. & Pierre, C., 1997, Analysis and Design Issues for Modern Aerospace Vehicles. p. 419-425 7 p. (ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE); vol. 1997-I).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    11 Scopus citations