Selenium and arsenic removal from water using amine sorbent, competitive adsorption and regeneration

Selenium (Se) and arsenic (As) are toxic contaminants in surface water and drinking water. The human body needs little quantity of Se, but too high dose is not allowed. Metal oxides such as iron oxides were used for adsorption or co-precipitation removal of As from water. However, the regeneration and stability problems of metals oxides sorbents are unsatisfactory, and there is not enough adsorbent for Se removal from water also. We developed the acrylic amine fiber (AAF) for adsorption reomval of Se and As from water and systematically studied the influenced factors. Batch experiments were conducted for investigating the adsorption edges, while column filtration tests were employed for dynamic application edges. At neutral pH, the Langmuir isotherm fittings gave the maximum adsorption capacities of As(V), As(III), Se(VI) and Se(IV) are 270.3, 40.5, 256.4, and 158.7 mg/g, respectively. Effects of co-existing inorganic anions on As(V) and Se(VI) adsorption using AAF gave the order of PO₄³⁻ > SO₄²⁻ > NO₃⁻ > SiO₃²⁻, while different organic acids obey the order of citric acid > oxalic acid > formic acid. Fourier transform infrared analysis showed the PO₄³⁻ and SO₄²⁻ competition mechanisms are electrostatic repulsions, while the competition of organic acids derived from acid-base reaction between the carboxyl group and the amino group. Column filtration and regeneration results showed that the spent AAF can be regenerated using 0.5 mol/L HCl solution and reused with no much decrease of adsorption capacity.