TY - JOUR
T1 - Triaxial mechanical characterization of ultrasoft 3D support bath-based bioprinted tubular GelMA constructs
AU - Torza, Ahsanul
AU - Zgeib, Ralf
AU - Wang, Xiaofeng
AU - Zaeri, Ahmadreza
AU - Zhang, Fucheng
AU - Cao, Kai
AU - Chang, Robert
AU - Weickenmeier, Johannes
N1 - Publisher Copyright:
© 2024 Elsevier Ltd
PY - 2024/9/1
Y1 - 2024/9/1
N2 - Support bath-based extrusion bioprinting is an emerging additive manufacturing paradigm that allows for the creation of geometrically complex three-dimensional tissue-mimicking constructs. Although this approach enables arbitrary geometries to be printed, preserving shape and mechanical integrity after the construct is extracted from the support bath is one of the main challenges today. In the present study, we systematically tested the effect of critical printing parameters on construct integrity and stiffness. Specifically, we varied the concentration and temperature of the bioink and support bath material, hydrogel crosslinking time, and cell density of the bioink. While previous studies on hydrogel materials quantify construct properties based on a single loading mode-such as uniaxial testing or rheological experiments, for example—we used a multiaxial mechanical testing protocol to assess the printed construct's response in tension, compression, and shear. For each sample, we determined a single set of material parameters by simultaneously fitting all three modes in our inverse finite element framework. In support of future modeling work, we analyzed three different constitutive models with respect to their ability to match the construct's mechanical response. We observed that GelMA concentration, temperature, and cell density have a statistically significant effect on the construct stiffness; support bath temperature and UV crosslinking time have a weak effect on construct stiffness; and support bath concentration appears to have no direct effect on the measured construct properties. Our construct stiffness were found to vary between 0.07 and 2.2 kPa depending on printing conditions, and showed noticeable tension–compression asymmetry as well as pronounced nonlinear behavior when loaded under shear.
AB - Support bath-based extrusion bioprinting is an emerging additive manufacturing paradigm that allows for the creation of geometrically complex three-dimensional tissue-mimicking constructs. Although this approach enables arbitrary geometries to be printed, preserving shape and mechanical integrity after the construct is extracted from the support bath is one of the main challenges today. In the present study, we systematically tested the effect of critical printing parameters on construct integrity and stiffness. Specifically, we varied the concentration and temperature of the bioink and support bath material, hydrogel crosslinking time, and cell density of the bioink. While previous studies on hydrogel materials quantify construct properties based on a single loading mode-such as uniaxial testing or rheological experiments, for example—we used a multiaxial mechanical testing protocol to assess the printed construct's response in tension, compression, and shear. For each sample, we determined a single set of material parameters by simultaneously fitting all three modes in our inverse finite element framework. In support of future modeling work, we analyzed three different constitutive models with respect to their ability to match the construct's mechanical response. We observed that GelMA concentration, temperature, and cell density have a statistically significant effect on the construct stiffness; support bath temperature and UV crosslinking time have a weak effect on construct stiffness; and support bath concentration appears to have no direct effect on the measured construct properties. Our construct stiffness were found to vary between 0.07 and 2.2 kPa depending on printing conditions, and showed noticeable tension–compression asymmetry as well as pronounced nonlinear behavior when loaded under shear.
KW - Inverse finite elements
KW - Live-dead cell assay
KW - Support bath bioprinting
KW - Triaxial mechanical characterization
KW - Tubular cell-laden GelMA constructs
UR - http://www.scopus.com/inward/record.url?scp=85196969011&partnerID=8YFLogxK
UR - http://www.scopus.com/inward/citedby.url?scp=85196969011&partnerID=8YFLogxK
U2 - 10.1016/j.ijsolstr.2024.112938
DO - 10.1016/j.ijsolstr.2024.112938
M3 - Article
AN - SCOPUS:85196969011
SN - 0020-7683
VL - 301
JO - International Journal of Solids and Structures
JF - International Journal of Solids and Structures
M1 - 112938
ER -